Epson ELPMBPJF - Manual (Page 8)

o
Attach adapter plate (L) to projector using one
screw (M, N, O or P) for each channel as shown.
Tighten all screws, while keeping the center ofgravity.
Be sure that adapter plate (L) is straight. Adjust the
feet ofthe channels to keep the adapter plate level.
Tighten all screws with 4 mm security allen wrench
(B) orwrench provided with projector mount, while
keeping the center of gravity. If M3 screws are used,
tighten using 2 mm security allen wrench (Q).
NOTE: Projectors may require different size screws
for mounting. Use a combination ofscrews (M, N, O
or P) and foot adjustment that will result in channels
of adapter plate (L) fitting tightly against projector.
Important: In order to properly engage the threads in
the mounting holes, the screw must be turned at least
3 full turns.
NOTE: If using screw (M), place washer (R) between
screw (M) and foot of channel.
Attaching Adapter Plate to Projector Mount
O
Attach projector, with adapter plate already on
it, to the projector mount (A) by inserting the
projector mount (A) into the adapter plate
connection and twisting until the adapter plate
will no longer turn (about 75°). The spring
loaded captive screw should line up with a
corresponding hole on the adapter plate (this
should line up automatically when the two are
connected). Push down and tighten the spring
loaded captive screw to secure the adapter
plate to the mount. If not using the optional
security feature, fasten thumb
screw (D) in the hole opposite the spring loaded
captive screw.
OPTIONAL: For security option, use #10-32 x
3/8" security screw (E) in the hole opposite
the spring loaded captive screw. Tighten with
security allen wrench (B). This will prevent the
projectorfrom being removed.
NOTE: Be sure to only use the #10-32 x 3/8"
screw (E) (or the thumb screw (D) opposite
the spring loaded captive screw.
A WARNING
Do not lift more weight than you can handle! Use
additional man power or mechanical lifting equip­
ment to safely handle placement ofthe projector!
CUTAWAY VIEW
OF CEILING
PLATE (G)
PROJECTOR
8 o f 1 0 ISSUED:01-23-07 SHEET #:055-9498-4 05-20-10
Visit the Peerless Web Site atwww.peerlessmounts.com For Technical Support Contact Peerless Mounts at 1-800-729-0307 or708-865-8870.