Warning, Using the cigarette lighter power cord, Using an optional ac adaptor – Uniden PRO340XL User Manual
Page 13: With, Ground vehicles
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recharging Batteries
You can recharge nickel-cadmium batteries while they are installed in the
PRO340XL. Use the included Cigarette Lighter Power Cord or an optional AC
Adaptor. Be sure to observe the polarity of the Adaptor before connecting it to
the radio.
Note:
The
PRO340XL
will not operate while the batteries are
recharging.
WARNING
Do not attempt to charge alkaline batteries in this radio. Make sure you
have installed 10 rechargeable nickel-cadmium batteries before
connecting power to the charge connection.
I
Using the Cigarette Lighter Power Cord
IMPORTANT:
The Cigarette Lighter Power Cord is designed to be used
ONLY
with
negative
ground vehicles.
Do not
attempt to
charge the batteries with the power cord connected to a
positive ground vehicle.
1
.
Plug one end of the Cigarette Lighter Power Cord into the CHARGE
connection on the side of the PRO340XL.
2
.
Plug the other end of the Cigarette Lighter Power Cord into the vehicle’s
cigarette lighter socket.
Using an optional AC Adaptor
IMPORTANT:
Make sure you have an AC Adaptor that supplies t2V DC
power with the correct polarity before connecting it to the
radio.
1
.
Plug one end of the AC Adaptor into the CHARGE connection on the side
of the PR0340XL.
2.
Connect the other end of the AC Adaptor to an AC power source.
Note;
For information on time required to recharge batteries, consult the
manufacturer of the battery or AC Adaptor.
11