Lying a disc, Basic playback, Press power – Toshiba SD-1200U User Manual
Page 20: Press open/close, Press play, Playing a disc
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
lying a Disc
This section shows you the basics on how to piay a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
POWER indicator
PAUSE STOP
cp
1
T
DVD display 2
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected
to the DVD video player.
1
Press POWER.
POWER
[□)
The DVD video player turns on and
the POWER indicator on the player
illuminates.
When the DVD video player is turned on for
the first time, an initial set-up display appears.
See “Initial set-up” and make the proper
settings before proceeding to step 2.
Press OPEN/CLOSE.
OPEN/CLOSE jhe disc tray opens.
3D
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the
DVD video player to malfunction.
• Do not place anything except DVD video discs,
VIDEO CDs or audio CDs on the disc tray.
Press PLAY.
PLAY
The disc tray closes and playback
I ► I
starts.
If you insert a DVD video disc that contains a title
menu, a menu may appear. See “Locating a title
using the top menu.”
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD video disc.)
TOSHIBA
Thank you for your purchase of this TOSHIBA DVD Player.
Please make o seledion
for On-Screen Language and your TV shape and
press ENTER button on your remote control.
I
Initial set-up
Make the following settings on the display.
On-Screen Language:
Select the appropriate
on-screen language.
TV Shape: Select a
picture size according to
the aspect ratio of your
TV. (See [3^ for details.)
1 Press A / T to select “On-Screen Language,” and
press ENTER.
2 Select a language using A / V, and press ENTER.
3 Press T to select “TV Shape,” and press ENTER.
4 Select a picture size using A / V, and press ENTER.
5 Finally press SETUP.
All your selections are entered and the display
disappears.
To change your settings, see “Customizing the Function
Settings.”
120