Troubleshooting, Manufactured by, Toshiba – Toshiba CM1320A User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
Before caiilng a service technician, please check the following table for a possible cause of
the problem and some solution.
Problem
Solution
Monitor will not turn on
Make sure the power cord Is plugged In, then press
POWER button.
No picture, no sound
Check cable connections.
No sound, picture OK
Try pressing VOLUME > button.
Poor picture, sound OK
•
Check cable connections.
•
Check if the impedance select switch is properly
set.
•
Adjust Picture menu.
Poor color or no color
Adjust TINT and /or COLOR in the Picture menu.
If you change the direction of the monitor while the
monitor ^ activated, the picture may suffer from
color shading. If so, turn off the
monitor
and allow
for about 30 minutes to cool, then turn on the
nrK)nitor again.
The picture should improve.
Exempllcms
ISO are not liable for:
(1) damage caused by fires, natural disaster (such as, earthquake, etc.), acts by third person, accidents,
owner's misuse, or use in other improper conditions;
(2) incidental damages (such as profit loss or interruption in business, modification or erasure of record
data, and so forth) caused by use or inability to use of this product;
(3) damage caused by neglect of the instructions described in the owner's manual; and
(4) damage caused by misuse or malfunction through simultaneous use of this product and the connected
equipment.
TOSHIBA AMERICA INFORMATIOIM SYSTEMS. INC.
9740 IRVINE BLVD., IRVINE, CA 92618-1697
TEL: (949) 583-3000
MANUFACTURED BY
P.T. TOSHIBA CONSUMER PRODUCTS INDONESIA.
Printed in Indonesia
(04-06)
TOSHIBA