Plu table deletion (submode no. 4), If-04 – Toshiba TEC MA-79 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PLU TABLE DELETION (Submode No. 4)
Unnecessary PLUs may be deleted from the PLU program table file.
El-01397
After PLU Reset
mwmMmm)
Mode Lock: SET
4 [@/FOR]
t
Submode
No.
Same as PLU |
Table Setting.
I
flTEWI CORR]
PLU Code I [PLU]
of the PLU to
be deleted.
Repeatable for other PLUs to be deleted.
> [AT/TL]
NOTES: 1) The PLU Code entered in the above operation is one of those set in the
PLU TABLE SETTING OR CHANGING operation.
2)
Deletion is performed for one PLU after another. No operation to delete
all the PLUS at once is provided.
3)
The above operation will result in an error if operated during another setting
operation.
ex.) To delete PLU No. 21:
Mode Lock to “SET”, enter 4, depress [@/FOR].
[ITEM CORR] 21 [PLU].
[AT/TL] to end.
if-04
2 1
^
■VD
CG38. 1 4 : 3 1
-55
-