How to reset your unit – JVC KD-S575 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAINTENANCE
...................................................................
22
Handling CDs................................................................................ 22
TROUBLESHOOTING
...........................................................
23
SPECIFICATIONS
................................................................24
« o:-
How to reset your unit
Press and hold both the SEL (Select) and 6/l/ATT
(Standby/On/ATT) buttons at the same time for
several seconds.
This will reset the built-in microcomputer.
NOTES:
Your preset adjustments — such as preset
channels or sound adjustments — will also be
erased.
If a CD is in the unit, it will eject when you reset
the unit. Pay attention not to drop the CD.
6/1/ATT
(Standby/On/ATT)
BEFORE USE
•
For safety....
• Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
• Stop the car before performing any complicated
operations.
* Temperature inside the car....
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.