Toshiba SD-3960SU - Manual (Page 57)

Function setup
You can change the default settings to customize performance to your
preference.
Customizing the Function Settings
3 , 4
RETURN
2
1 . 6
CVC^ Setting procedure
^ Press SETUP during stop
SETUP
o The following on-screen display
appears.
ra © ii^ :.T"
Pierre
Prs^ressive Csnversiofi Auto
Pause/Stil Auto
Press ◄ / ► to select a symbol for the
setting you want to change.
(See the next page.)
Picture performance settings
Output sound settings
Language settings
Display settings
Operational settings
Initial setup
Press A / T to select the setting you want
to nhannfi than nra.ss FNTFR
3 Press A / T to select the settin
to change, then press ENTER
Change the selection by A / T or other
buttons, by referring to the corresponding
pages ([^ - ), then press ENTER.
Repeat steps 3 and 4 to change other
5 settings.
To select another operation, go back to step 2.
6
Press SETUP.
The on-screen display disappears.
o
I To return to the previous display
Press RETURN.
RETURN
O
Notes
• To quit the procedure, press the SETUP button to turn off
the on-screen display.
• The SETUP button can function even during normal
playback, however some operations may be inaccessible,
and a message will appear. In this case, try again after
playback is stopped.
60