Parallel interface type, 4, installing the printer, Connecting the printer cable and power cable – Toshiba TEC DRJST-51 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
E01-13010
DRJST-51 SERIES
4, INSTALLING THE PRINTER
Connecting the Printer Cable and Power Cable
WARNING!
Turn the POWER SWfTCH to OFF of ENGINE Box before connecting the power cord
or cables.
Follow these steps to connect the printer to the TEC POS Terminal ST-5500 Series.
4.1. Parallel Interface Type
1) Connect the printer cable and printer power cable to the printer. The cables are secured with the
attached cable clamp as shows below.
2) Connect the printer cable and the power cable of the R/J Printer to PRT and P24V of the
ENGINE Box, respectively.
- 4 -
Advertising