Olympus 700 - Manual (Page 69)

When you get an error message on the camera..
Monitor indication Possible cause Corrective action
G]
CARD ERROR
There is a problem with
the card. This card cannot be used. Insert a
new card.
0
WRITE-
PROTECT
Writing to the card is
prohibited.
The recorded image has been
protected (read-only) on a computer.
Download the image to a computer
and cancel the read-only setting.
o
MEMORY FULL
The internal memory
has no available
memory and cannot
store any new data.
Insert a card or erase unwanted
data. Before erasing, backup the
data of important pictures using the
card, or download such pictures to a
computer.
0
CARD FULL
The card has no
available memory and
cannot store any new
data. Replace the card or erase unwanted
data. Before erasing, download
important pictures to a computer.
t 1
I 1
NO pTcfuRE
There are no pictures in
the internal memory or
on the card. The internal memory or the card
contains no pictures.
Record pictures.
m
PICTURE
ERROR
There is a problem with
the selected picture and
it cannot be played back
on this camera.
Use image processing software to
view the picture on a computer. If that
cannot be done, the image file is
damaged.
The battery
compartment/card cover
is open.
Close the battery compartment/card
cover.
1
CARD-COVER
OPEN
CD
BATTERY
EMPTY
The battery is empty. Charge the battery.
©
Y/M/D
When the camera is
used for the first time or
the battery has been
removed for a long time,
the date and time are on
the factory default
setting.
Set the date and time.
o
CD
(Q
O
‘C
O
c
(D
O’
CD
CD
69