RCA CRT Television - Manual (Page 32)

USING THE MENU SYSTEM
CHOICE LISTS
Choice lists are used to choose a particular setting from a list. When the
choice list appears, the highlighted item is the one that is currently
selected, or "in use."
Point to a choice on a menu and press MENU or OK to select that choice.
You will then return to the previous screen.
Now that you know how to access the menus and adjust the control
panels the following pages provide a brief explanation of all the menu
features. The features are organized in order of their location on the
Main Menu.
AUDIO MENU
Mute Press OK to reduce the TV’s volume to its minimum level. Press
OK again to restore the volume.
Tone Controls Displays the slider controls for adjusting the TV's treble,
bass and balance.
Audio Processor Displays a choice list of available audio modes, which
control the way the sound comes through your speakers.
Mono Plays the sound in mono only. Use this setting when
receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into left and right
channels. Most TV programs and recorded materials have stereo
audio. The TV displays the word STEREO when you tune to a
program that is broadcast in stereo.
SRS Stereo {•) SRS* This technology is an audio processing
technology that adds greater depth and stereo separation to stereo
audio signals.
Enhanced SRS Stereo Enhances the SRS signal to give the
impression of even greater depth and stereo separation.
Sound Logic’'“ Stereo Reduces the annoying blasts in volume
during commercial breaks, and also amplifies softer sounds in
program material. Eliminates the need to constantly adjust volume
control.
* SRS, Sound Retrieval System and the SRS logo {•) are registered trademarks of SRS Labs, Inc.
30