Toshiba MA-1050-100 Series - Manual (Page 60)

CONDITION: After an Auto Reset and GT Reset
OPERATION: Mode Lock: SET
i
FINANCIAL TOTAL NAME PROGRAMMING OR CHANGING
for another Item name
|9| -» [X] ^ ]Code for the Total Item| I ST i —
(See the table on the
next page.)
Repeat for the next character,
i Character Code |
(2 or 3 digits;
see the table
on page 72.)
one double-sized
character
for spacing instead
of a character
BE
Entire name with
all double-sized
characters
Repeat
(for the
next
sequen-
c ia 1
coded
Item)
-»[ at / tl I
to end the name
(If any space is
left unprogrammed
in the tail, it
will automat ica11y
be programmed as
space,)
NOTES: 1. A maximum of 6 regular-sized characters or 3 double-sized charac­
ters may be programmed for one item name, with some exceptions,
A combination of two types is also available.
2. To go on to another Item name programming, the sequence | Code
for the Total ltem|rST|" may be skipped if the code is sequencial
ex.) To program:
Item Code 15 (Paid Out) to "PO" (both double-sized), and
Item Code 23 (Return Merchandise) to "RTN” (all regular-sized):
Key Operation
Mode Lock to SET, enter 9, depress [Y]
Enter
15,
depress
I
ST[. (Item Code)
Depress twice.
Enter 26, depress , (P)
Enter
25,
depress [W\ *
(o)
Depress f ST i (to end the name).
Enter 23, depress fS t I (Item Code).
Enter 28, depress . (R)
Enter 30, depress [S' (T)
Enter 29, depress , (N)
Depress
I
STi(to end the name).
Depress IAT/TLI to end this program.
r “1
L_ -1
THANK YOU
05-17-03 «0
09
♦115 PO
»23 RTN
0027 13:58
—
- 56 -