Backup light, side marker light, and tail/stop, Turn light — 300 models – Chrysler 2007 300 User Manual
Page 376
Advertising
Backup Light, Side Marker Light, and Tail/Stop
Turn Light — 300 Models
1. Open the Trunk.
2. Remove two fasteners from the back of the tail light
assembly.
3. Pull back the trunk liner.
4. Remove the remaining fastener from the back of the
tail light assembly.
5. Push the electrical connector locking tab to the side.
6. Disconnect the electrical connector.
376
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: