Chrysler 2008 PT Cruiser - Manual (Page 306)

MANUAL TRANSAXLE — RECOMMENDED SHIFT
SPEEDS
To use your manual transaxle for optimal fuel economy,
it should be upshifted as listed in Table 1.
Table 1 - Manual Transaxle Normal Acceleration
And Cruise Shift Speeds In mph (km/h)
Engine Mode 1 to 2 2 to 3 3 to 4 4 to 5
2.4L
Turbo
Accel-
eration
15 (24) 25 (40) 40 (65) 45 (72)
Cruise 15 (24) 25 (40) 42 (68) 45 (72)
2.4L
Non-
Turbo
Accel-
eration
15 (24) 25 (40) 40 (65) 45 (72)
Cruise 15 (24) 25 (40) 42 (68) 45 (72)
For improved performance, your manual transaxle may
be upshifted up to the maximum speeds listed in Table 2
(within legal speed limits).
Table 2 - Manual Transaxle Maximum Performance
Shift Speeds In mph (km/h)
Engine 1 to 2 2 to 3 3 to 4 4 to 5
2.4L 30 (48) 60 (97) 85 (136) 115 (185)
If you exceed these speeds, you may notice the engine cut
in and out. This is caused by an electronic limiter in the
engine computer. The engine will run normally when
you reduce engine speed.
Downshifting
Proper downshifting will improve fuel economy and
prolong engine life.
CAUTION!
If you skip a gear while downshifting or downshift
at too high an engine speed, you could damage the
engine, transmission, or clutch.
304 STARTING AND OPERATING