Parking brake – Chrysler 2009 300 SRT User Manual

Page 329

Advertising
background image

apparent, and/or the system is not functioning as antici-
pated. Coordinate inspection efforts through an autho-
rized dealer.

No chemical flushes should be used in any power
steering system; only the approved lubricant may be
used.

WARNING!

Fluid level should be checked on a level surface and
with the engine off to prevent injury from moving
parts and to ensure accurate fluid level reading. Do
not overfill. Use only manufacturer’s recommended
power steering fluid.

If necessary, add fluid to restore to the proper indicated
level. With a clean cloth, wipe any spilled fluid from all
surfaces. Refer to “Fluids, Lubricants, and Genuine
Parts” in Section 7 for the correct fluid type.

PARKING BRAKE

The parking brake should always be applied when the
driver is not in the vehicle.

WARNING!

Never use PARK position on an automatic transmis-
sion as a substitute for the parking brake. Always
apply the parking brake fully when parked to guard
against vehicle movement and possible injury or
damage.

When parking on a flat surface, place the shift lever in the
PARK position first and then apply the parking brake.

When parking on a hill, it is important to apply the
parking brake before placing the shift lever in PARK,
otherwise the load on the transmission locking mecha-
nism may make it difficult to move the shift lever out of

STARTING AND OPERATING

327

5

Advertising
This manual is related to the following products: