Chrysler 2009 Aspen - Quick Reference Guide - Manual (Page 10)

Automatic Temperature Control (ATC)
AUTOMATic OPErATiOn
• Press the AUTO button to turn the system on.
• Select the desired temperature by pushing the Temperature control
buttons (driver & Passenger).
• The system will maintain the set temperature automatically.
Air cOndiTiOning (A/c)
• A/c compressor operation is automatic when you press the AUTO
button. The A/c symbol is not displayed when in AUTO mode.
Air rEcircULATiOn
• Use recirculation for maximum A/c operation.
• for window defogging, turn recirculation off.
• recirculation is not allowed in defrost or defrost/floor (mix) modes.
if recirculation is selected when the mode control is in defrost or
defrost/floor (mix), the recirculation symbol will flash three times
indicating recirculation is not available.
AcTivATing rEAr PASSEngEr cLiMATE cOnTrOLS
• Push the rear climate controls button, located on the instrument
panel to cycle through the four rear passenger climate control modes:
• AUTO rEAr – System automatically adjusts rear temperature.
• MAnUAL – driver adjusts rear temperature and blower speed.
• cOnTrOL in rEAr – rear passengers control temperature and
blower speed.
• rEAr Off – no ventilation in rear passenger area.
• The rear passenger climate controls are located in the rear
of the center console between the front seats.
Push
On/Off-
Rotate Blower
Control
Push
Driver Temp.
Control
Push
A/C
Button
Push
AUTO
Button
Push Rear
Climate Control
Button
Push
Passenger/Rear
Temp. Control
Push
Air
Recirc.
Rotate Rear
Wiper/Push
Rear Washer
Push
Mode
Buttons
Push Rear
Window
Defroster
Button