Chrysler 2010 300 SRT - Owner Manual - Manual (Page 290)

If the problem has been momentary, the transmission can
be reset to regain all forward gears.
AUTOSTICK
ா
AutoStick ௡ is a driver-interactive transmission that offers
manual gear shifting to provide you with more control of
the vehicle. AutoStick
௡ allows you to maximize engine
braking, eliminate undesirable upshifts and downshifts,
and improve overall vehicle performance. This system
can also provide you with more control during passing,
city driving, cold slippery conditions, mountain driving,
trailer towing, and many other situations.
Operation
By placing the shift lever in the DRIVE position, it can be
moved from side to side. This allows the driver to select
a higher or lower range of gears. Moving the shift lever to
the left (-) triggers a downshift and to the right (+) an
upshift. The gear position will display in the instrument
cluster on the transmission range indicator.
NOTE:
• In AutoStick௡ mode, the transmission will shift up and
down when the driver manually moves the shift lever
right (D+) or left (D-).
• An “UPSHIFT” message will appear in the Electronic
Vehicle Information Center (EVIC) portion of the in-
strument cluster when using AutoStick
௡. This message
appears in order to alert the driver to upshift to the
next gear. The “UPSHIFT”message will display while
operating the vehicle at higher engine revolutions per
minute (RPM).
You can shift in or out of the AutoStick ௡ mode at any
time without taking your foot off the accelerator pedal.
When you wish to engage AutoStick
௡, simply move the
shift lever to the right (D+) or left (D-) while in the DRIVE
position. The transmission will remain in the current gear
until an upshift or downshift is chosen. When you wish
to disengage AutoStick
௡, hold the shift lever to the right
5
STARTING AND OPERATING 289