To disarm the alarm, Security system manual override – Chrysler 2010 PT Cruiser - Owner Manual User Manual

Page 20

Advertising
background image

Vehicle Security Alarm is arming. During this period, if a
door is opened, the ignition switch is turned ON, or the
power door locks are unlocked by either the power door
lock switch or the RKE transmitter, the Vehicle Security
Alarm will automatically disarm. After 16 seconds, the
Vehicle Security Light will flash slowly. This shows that
the Vehicle Security Alarm is fully armed.

To Disarm the Alarm

Unlock a front door using the RKE transmitter.

Starting the vehicle with a valid Sentry Key

௡ will disarm

the Vehicle Security Alarm. A valid key is one that is
programmed to that particular vehicle. A valid key will
disarm the Vehicle Security Alarm. An invalid key will
trigger the alarm.

Tamper Alert
If the horn sounds three times when you unlock a front
door using the RKE transmitter, the alarm has been
activated. Check the vehicle for tampering.

Security System Manual Override

The Vehicle Security Alarm will not arm if you lock the
doors using the manual door lock plunger.

Door Lock Plunger

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

19

Advertising