Programming additional transmitters, Battery replacement – Chrysler 2010 Sebring Convertible - Owner Manual User Manual

Page 27

Advertising
background image

Programming Additional Transmitters

Refer to Sentry Key

௡ “Customer Key Programming.”

If you do not have a programmed RKE transmitter,
contact your authorized dealer for details.

Battery Replacement

The recommended replacement battery is CR2032.

NOTE:

• Perchlorate Material — special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

• Do not touch the battery terminals that are on the back

housing or the printed circuit board.

1. With the RKE transmitter buttons facing down, use a
flat blade tool to pry the two halves of the RKE transmit-
ter apart. Make sure not to damage the seal during
removal.

2. Remove and replace the battery. Avoid touching the
new battery with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it with
rubbing alcohol.

3. To assemble the RKE transmitter case, snap the two
halves together.

Battery Service

26

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: