Enhanced seat belt use reminder system, Beltalert – Chrysler 2011 200 - Owner Manual User Manual

Page 57

Advertising
background image

NOTE:

• If you have difficulties or problems resetting the

Active Head Restraints, see an authorized dealer.

• For safety reasons, have the Active Head Restraints

checked by a qualified specialist at an authorized
dealer.

Enhanced Seat Belt Use Reminder System
(BeltAlert

)

BeltAlert

௡ is a feature intended to remind the driver to

fasten their seat belt. This feature is active whenever the
ignition is on. If the driver is unbelted, the Seat Belt
Reminder Light will turn on and remain on until the
driver seat belt is fastened. BeltAlert

௡ triggers within

60 seconds of vehicle speed over 5 mph (8 km/h). The
reminder sequence lasts for 96 seconds or until the driver
seat belt is fastened. After the sequence completes, the
Seat Belt Reminder Light remains illuminated until the
driver seat belt is fastened. The driver should instruct all
other occupants to fasten their seat belts. If the driver seat
belt is unbuckled while traveling at speeds greater than
5 mph (8 km/h), BeltAlert

௡ will chime as a single

notification and illuminate the Seat Belt Reminder Light,
then will proceed to the 96 second reminder sequence.

AHR In Reset Position

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

55

Advertising