Chrysler 2012 300 SRT - Owner Manual - Manual (Page 302)

Oil Change Required
Your vehicle is equipped with an engine oil change
indicator system. The
ЉOil Change DueЉ message will
display in the EVIC for five seconds after a single chime
has sounded at the start of each ignition that an oil
change is due. The engine oil change indicator system is
duty cycle based, which means the engine oil change
interval may fluctuate dependent upon your personal
driving style.
Unless reset, this message will continue to display each
time you cycle the ignition to the ON/RUN position. To
turn off the message temporarily, press and release the
MENU button. To reset the oil change indicator system
(after performing the scheduled maintenance), perform
the following procedure:
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the ON/
RUN position (Do not start the engine.)
2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.
3. Without pressing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Fuel Economy
Press and release the UP or DOWN button until ЉFuel
Economy Љ is highlighted. Press the SELECT button and
the next screen will display the following:
• Average Fuel Economy/Miles Per Gallon
• Distance To Empty (DTE)
• Miles Per Gallon (MPG)
300 UNDERSTANDING YOUR INSTRUMENT PANEL