Chrysler 2012 200 - Owner Manual - Manual (Page 444)

• Blot any remaining stain with a clean, damp towel.
• For tough stains, apply MOPAR௡ Total Clean or
equivalent, or a mild soap solution to a clean, damp
cloth and remove the stain. Use a fresh, damp towel to
remove soap residue.
• For grease stains, apply MOPAR௡ Multi-Purpose
Cleaner or equivalent to a clean, damp cloth and
remove the stain. Use a fresh, damp towel to remove
soap residue.
• Do not use any harsh solvents or any other form of
protectants on Stain Repel products.
Interior Care
Instrument Panel Cover
The instrument panel cover has a low glare surface,
which minimizes reflections in the windshield. Do not
use protectants or other products, which may cause
undesirable reflections. Use soap and warm water to
restore the low glare surface.
Cleaning Interior Trim
Interior Trim should be cleaned starting with a damp
cloth, a damp cloth with MOPAR
௡ Total Clean or equiva-
lent, then MOPAR
௡ Spot & Stain Remover or equivalent
if absolutely necessary. Do not use harsh cleaners or
Armor All
௡. Use MOPAR௡ Total Clean or equivalent to
clean vinyl upholstery.
Cleaning Leather Upholstery
MOPAR
௡ Total Clean or equivalent is specifically recom-
mended for leather upholstery.
Your leather upholstery can be best preserved by regular
cleaning with a damp soft cloth. Small particles of dirt
can act as an abrasive and damage the leather upholstery
and should be removed promptly with a damp cloth.
Stubborn soils can be removed easily with a soft cloth
442 MAINTAINING YOUR VEHICLE