Automatic transmission – Chrysler 2013 300 - Owner Manual User Manual

Page 371

Advertising
background image

The engine block heater cord is routed under the hood on
the driver side of the vehicle. It has a removable cap that
is located on the driver side of the Integrated Power
Module.

WARNING!

Remember to disconnect the engine block heater
cord before driving. Damage to the 110-115 Volt
electrical cord could cause electrocution.

AUTOMATIC TRANSMISSION

CAUTION!

Damage to the transmission may occur if the follow-
ing precautions are not observed:
Shift into PARK only after the vehicle has come to

a complete stop.

(Continued)

CAUTION! (Continued)

Shift into or out of REVERSE only after the vehicle

has come to a complete stop and the engine is at
idle speed.

Do not shift between PARK, REVERSE, NEU-

TRAL, or DRIVE when the engine is above idle
speed.

Before shifting into any gear, make sure your foot

is firmly pressing the brake pedal.

NOTE:

You must press and hold the brake pedal while

shifting out of PARK.

5

STARTING AND OPERATING

369

Advertising