Getting started, Key fob, Locking and unlocking the doors – Chrysler 2014 200 - User Guide User Manual

Page 10: Opening the trunk, Panic alarm

Advertising
background image

KEY FOB

Locking And Unlocking The Doors

• Press and release the LOCK button on the

RKE transmitter to lock both doors. The
turn signal lights will flash and the horn will
chirp to acknowledge the signal.

• Press and release the UNLOCK button

on the RKE transmitter once to unlock the
driver’s door (EVIC can be setup for driver
door first, otherwise this will unlock all
doors), or press the unlock button twice
within five seconds to unlock all doors.
The turn signal lights will flash to acknowl-
edge the unlock signal. The illuminated
entry system will also turn on.

• All doors can be programmed to unlock

on the first press of the UNLOCK button.
Refer to Programmable Features in this
guide.

Opening The Trunk

• Press the Trunk Release button on the trans-

mitter two times within five seconds to open
the trunk.

Panic Alarm

• Press the PANIC button once to turn the panic alarm on.

• Wait approximately three seconds and press the button a second time to turn the panic

alarm off.

WARNING!

When leaving the vehicle, always remove the Key Fob from the ignition and lock your
vehicle.

Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing
children to be in a vehicle unattended is dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Children should be warned not to touch the
parking brake, brake pedal or the shift lever.

Do not leave the Key Fob in the vehicle, or in a location accessible to children. A child
could operate power windows, other controls, or move the vehicle.

1 — Trunk Release
2 — Unlock Door(s)
3 — Lock Door(s)
4 — Remote Start

G E T T I N G S T A R T E D

8

Advertising