Chrysler 2014 Country - User Guide - Manual (Page 121)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant –
3.6L Engine
We recommend you use
MOPAR® Antifreeze/Coolant
10–Year/150,000 Mile Formula
OAT (Organic Additive
Technology).
13.4 Quarts (12.6 Liters)
Includes heater and coolant
recovery bottle filled to
MAX level. Add 2.9 Quarts
(2.8 Liters) if equipped with
rear heater.
Engine Oil with Filter –
3.6L Engine
We recommend you use API
Certified SAE 5W-20 Engine
Oil, meeting the requirements
of Chrysler Material Standard
MS-6395 such as MOPAR®,
Pennzoil®, and Shell Helix®.
Refer to your engine oil filler
cap for correct SAE grade.
6 Quarts (5.6 Liters)
Engine Oil Filter – 3.6L Engine We recommend you use
MOPAR® Engine Oil Filters.
—
Spark Plug – 3.6L Engine
We recommend you use
MOPAR® Spark Plugs
(Gap 0.043 in [1.1 mm]).
—
Automatic Transmission
Use Only ATF+4® Automatic
Transmission Fluid. Failure to
use ATF+4® fluid may affect
the function or performance of
your transmission. We recom-
mend MOPAR® ATF+4® Fluid.
—
Brake Master Cylinder
We recommend you use
MOPAR® DOT 3 and
SAE J1703. If DOT 3 is
not available, then DOT 4
is acceptable.
—
Power Steering Reservoir
We recommend you use
MOPAR® Power Steering
Fluid +4 or MOPAR® ATF+4®
Automatic Transmission Fluid.
—
Fuel Selection – 3.6L Engine 87 Octane
20 Gallons (76 Liters)
(Approximate)
M A I N T A I N I N G Y O U R V E H I C L E
119