Cleaning the parksense® system, Parksense® system usage precautions – Chrysler 2015 200 - Owner Manual User Manual

Page 244

Advertising
background image

vehicle is in REVERSE. Refer to “Electronic Vehicle

Information Center (EVIC) or Љ Driver Information Dis-

play (DID)” for further information.
If ЉPARKSENSE UNAVAILABLE WIPE REAR SENSORSЉ

or ЉPARKSENSE UNAVAILABLE WIPE FRONT SEN-

SORSЉ appears in the Electronic Vehicle Information

Center (EVIC) or Driver Information Display (DID) make

sure the outer surface and the underside of the rear

fascia/bumper and/or front fascia/bumper is clean and

clear of snow, ice, mud, dirt or other obstruction and then

cycle the ignition. If the message continues to appear see

an authorized dealer.
If the ЉPARKSENSE UNAVAILABLE SERVICE RE-

QUIREDЉ message appears in the EVIC/DID, see an

authorized dealer.

Cleaning The ParkSense® System

Clean the ParkSense® sensors with water, car wash soap

and a soft cloth. Do not use rough or hard cloths. Do not

scratch or poke the sensors. Otherwise, you could dam-

age the sensors.

ParkSense® System Usage Precautions

NOTE:

• Ensure that the front and rear bumper are free of snow,

ice, mud, dirt and debris to keep the ParkSense®

system operating properly.

• Construction equipment, large trucks, and other vibra-

tions could affect the performance of ParkSense®.

• When you turn ParkSense® off, the instrument cluster

will display “PARKSENSE OFF.” Furthermore, once

you turn ParkSense® off, it remains off until you turn

it on again, even if you cycle the ignition key.

242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising