Halo safety ring, Warning, Items in the hardware kit – Comfort Company 77103 Halo User Manual
Page 2
INSTALLATION STEPS:
ITEMS INCLUDED IN THIS BOX
TOOLS NEEDED FOR ASSEMBLY
½” Closed End Wrench
½” Socket with Ratchet Wrench Extension
1
Remove all bed rails
and all bed rail mount-
ing brackets prior to
installation.
2
Using the original bed
frame holes from the
Carroll Side Rail, in-
stall the Carroll Mount
(77107) using the en-
closed hardware (77108).
Tighten securely to bed
frame. (See Figure 2)
*The Halo Safety Ring is designed to accommodate a range of different bed manufacturers. If the device does not easily attach to the bed deck, interferes
with the sub-frame, or the mattress does not firmly contact the Halo Safety Ring bracket – DO NOT USE. Contact customer service at (800) 564 - 9248
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
Mattress must remain in firm contact with the Halo Safety
Ring on both sides of the bed. If a Halo Safety Ring is only
installed on one side of the bed, the mattress must remain in
firm contact with the mattress stay or mount bracket on the
other side of the bed.
In order to prevent entrapment in Zones 1 through 4 and
create a protective sleep environment, two complete Carroll
Circle Mounting Brackets must be installed on the same bed.
- WARNING -
77103HALO_LIT034_082012
2 OF 3
HALO SAFETY RING
MODEL: 77103 - CARROLL BED MOUNT
77104
1- Halo Safety Ring
Item No. 77104
2- Carroll Mount Brackets
Item No. 77107
2- Halo Safety Ring Hardware
Kits - Kit parts listed below
Item No. 77108
3“
77107
Bolts
Nuts
Washers
Lock
Washers
Tube Length
ITEMS IN THE HARDWARE KIT
ITEM #77108
2- 3” Zinc Bolts
2- Zinc Nut
4- Zinc Washers
2- Zinc Lock Washers
Your Halo Safety Ring is now installed
and ready for resident use!
3
Duplicate step 2 on the
opposite side of the
bed.
4
Slide the Halo Safe-
ty Ring (77104) into
the Carroll mounting
bracket on the pre-
ferred side by pinching
the detent pins on the
bottom bar of the Halo
Safety Ring. Once in-
serted, the detent pins
will pop out securing
the Halo Safety Ring in
position.
FIGURE 2