Comfort Company 77401/77402 Halo - Manual (Page 3)

• Regularly check the Halo device
to identify areas of possible
entrapment, immediately cease
using the bed until entrapment
risk is fixed.
• Regularly check to make sure
that there is no gap between the
Halo Safety Ring and the side of
the mattress. A gap could allow
the user to become wedged
between the bed rail and the
mattress.
• Follow all assembly instructions
carefully. Failure to follow the
instructions could result in serious
injury to the user(s) of the product.
Failure to return the Halo Safety
Ring to a parallel position when
the bed is in use may cause
entrapment hazard.
- WARNING -
HALO SAFETY RING
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
INSTRUCTIONS FOR USE
1
In order to rotate the Halo Safety
Ring, pinch the detent pins and
rotate the Halo Safety Ring ninety
degree (90°) as shown below.
The Halo Safety Ring can be grasped by the resident to assist in bed mobility. This can help build strength, increase
independence, and help prevent skin breakdown.
The Halo Safety Ring is designed to rotate ninety degrees (90°) to assist residents during transfers and as a bed mobility
device. Follow the steps for safely rotating the Halo Safety Ring.
2
Detent pins must engage with
the holes in Halo Safety Ring
bracket prior to use.
3
Always position the Halo Safety
Ring parallel with the bed when
in use and make sure detent pins
are engaged.
SAFETY PRECAUTIONS:
3 OF 3
MODEL: 77401
MODEL: 77402
IS-77401HALO-77402HALO
REV0114