Comfort Company Non-Quick Release Compass 4Pt Hardware - Manual

NON-QUICK RELEASE COMPASS HARDWARE (4 POINT)
Gently loosen bolts (C) and (D)on both sides to allow for adjustment of all mounting brackets.
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
1
Attach the cane mounts (A) facing forward as shown at the desired height, keeping the cane mounts symmetrical. 2
Place the mounting pegs (B) into the grooves on the cane mounts (A) on both sides. 3
When hardware is properly placed, be sure to secure bolts (C) and (D) tightly on both sides. 4
IS-NQ-COMPASS4-ACTAEMBRACE
REV0413
PARTS INCLUDED:
1 - Non-Quck Release Complete Compass Hardware (4 Point) Assembly
1 - 1/8 in. Hex Key
A
B
C
D