Comfort Company Rotating Interlock Mount - Manual

ROTATING INTERLOCK MOUNT
Comfort Arm ® , Smart Arm, DuraSoft Half Tray, and Swing Clear Half Tray
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
IS-ROTATINGINTERLOCKMOUNT
REV0413
Remove existing armrest from wheelchair.
Remove the two screws (A) from the bottom of the clamp using the 3/16” Hex Key provided
and position the assembly around the wheelchair arm rail.
1
2
Securely fasten the screws (A) as shown to secure the arm rest in place.
3
To adjust angle or swing unit away, loosen the adjustment knob (B).
4
Securely tighten the adjustment knob after the mount is correctly positioned.
5
Parts Included:
1 - Rotating Interlock Hardware Assembly
1 - 3/16” Hex Key
A
B
REPRESENTS WHEELCHAIR ARM RAIL
ARM ASSEMBLY IS SHOWN TO SHOW PROPER
MOUNTING POSITION. IT IS NOT INCLUDED IN THE
ROTATING INTERLOCK MOUNT KIT BUT IS AVAILABLE
TO ORDER SEPARATELY.