Comfort Company Smart Seat & Complete Seat - Manual

SMART SEAT & COMPLETE SEAT
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
IS-SMARTCOMPLETESEAT
REV0413
1
2 4
5
Remove existing seat from wheelchair.
3
1 2 3
Front View
Heavy Duty Buckle
Side View
Seat Rail
Desired Position
4 5
WARNING: Center strap MUST be secured and tightened to insure proper stability and safety
of seat. All straps MUST be checked periodically for tightness.
Place seat at the desired position and then
lower front 1” by adjusting the heavy duty
buckle on the front and rear strap.
Place drop hooks over the upper wheelchair
seat rail.
Thread center strap under bottom rails, move
strap to angled portion of bottom rail and
connection buckle.
Pull center strap as tight as possible. Tighten
rear strap. Tighten front strap until front of
seat is at desired height. This locks the unit
in place.
® ®