Comtrol ES9528-XT User Guide User Manual
Page 105
RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G
MAC Filter (Port Security) - 105
Configuration Using the Web Interface
Once you finish configuring the MAC settings, click Add to apply your configuration.
The following example shows:
•
Permit Source MAC address from 00c0.4e33.0000 to Destination MAC 00c0.4e33.0002.
•
The Permit rule is egress rule and it is bound to fastethernet Port 2.
Once you finish configuring the settings, click Apply to apply your configuration.
Note: You must Save the settings (
), if you want to maintain these settings if the ES9528 is powered
off.
Wildcard
Bit
Number of
Allowances
Note
Any
1111.1111.1111
All
Host
1
Only the source or destination
0000.0000.0003
0000.0000.000(00000011)
3
0000.0000.0007
0000.0000.000(00000111)
7
0000.0000.000F
0000.0000.000(11111111)
15
....