Comtrol VS3000S User Manual
Comtrol Accessories communication
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- InterChangeVS™ 3000 Series
- VS3000U and VS3000S
- InterChangeVS™ 3000 Series
- VS3000U and VS3000S
- Table of Contents
- List of Tables
- Introduction
- Working with the Phone Company
- Installing the Hardware
- 1. This equipment complies with Part 68 of the Fed...
- 2. FCC-compliant cables are provided with this equ...
- 3. If this equipment causes harm to the telephone ...
- 4. The telephone company may make changes in its f...
- 5. If experiencing trouble with the InterChangeVS-...
- 6. No repairs are to be made by you. Repairs are t...
- 7. This equipment cannot be used for public coin s...
- 1. Write down the serial number and Network (MAC) ...
- Table 2. Model and Serial Numbers
- 2. Optionally, mount the VS3000 into the rack usin...
- 3. Connect an Ethernet cable from the appropriate ...
- 4. Connect the ISDN cable(s) shipped with the VS30...
- 5. Connect the power cable to the unit and plug it...
- 6. Turn the VS3000 power switch to the on (1) posi...
- a. All of the LEDs flash on for one second and the...
- b. If using a 10Base-T Ethernet connection, the lo...
- c. The D channel LEDs flash in sequence from port ...
- d. All of the LEDs turn off for a moment.
- e. The B1 LED on PORT 1 flashes to indicate that i...
- f. Use the following table to determine the proble...
- Table 3. LED Display for Fatal Errors
- VS3000 Specifications
- Building Cables
- Troubleshooting
- Notices
- Index