Comtrol VS1100 Installation Reference Card - Manual (Page 3)

3. Connect the cable from the appropriate Ethernet
connection (10Base-T or AUI) on the VS1000 to your
server or Ethernet hub.
Note: Do not connect two VS1000 base units together.
If connecting the VS1000 directly to the server, an
Ethernet crossover cable is required. See the
Installation and Configuration Guide for details.
4. If installing only a VS1000, put the terminator plug
in the VS1100 connector of the VS1000 base unit.
Then go to the Power-On Diagnostics discussion.
5. If installing one or more VS1100 expansion units, go
to the Installing VS1100 Hardware discussion.
Installing VS1100 Hardware
Use the following procedure to connect InterChangeVS
1100 port extenders to the VS1000 base unit.
1.
Record the serial numbers of the VS1100 units.
VS1100 Model and Serial Numbers
VS1100 Serial Number*
1
2
3
* The identification tag is located on the back of the unit.
Server
VS-Link
Ethernet Connection
to Server or
Ethernet Hub
Terminator Plug