Comtrol DM AIR - Manual (Page 10)

10 - DeviceMaster AIR User Guide: 2000365 Rev. C Hardware Installation and WLAN Configuration
Connecting the Hardware and Initial Configuration
8. Open the web browser and enter the DeviceMaster AIR WLAN IP address
(default IP address is 192.168.0.30).
Note: If you do not know the IP address of the DeviceMaster AIR, you can use
the Reset button, which is between the antenna and the power receptacle
to reset it to the factory defaults.
9. Type admin in the User Name field and select Ok.
Note: Do not enter a password during the initial installation. A password is
configured later in this procedure.
10. Select the Run Wizard button when the Home screen appears.
Note: Optionally, you can configure the DeviceMaster AIR using the Network,
Wireless, and Admin tabs. Running the Wizard does not include
configuring the IP address. Configuring the IP address is discussed in
Network Configuration for the Serial Portion on Page 27.
This illustrates a Windows 2000 screen.