Comtrol DeviceMaster NS-Link - Manual (Page 57)

DeviceMaster Driver User Guide: 2000595 Rev. A Loading Port Configuration - 57
Using Driver Configuration Files
6. Highlight the configuration file and click Open. The configuration file loads in
a few moments.
7. Make the appropriate choice for your situation:
• Click No to the ComtrolApplet message, if you are using the file to set up
multiple devices with the same port-level settings.
• Click Yes to the ComtrolApplet message, if you are using the file to restore
a specific device. For example, you needed to remove and then re-install the
DeviceMaster NS-Link device driver.
8. Click Apply so that the configuration is saved on the device.
9. Repeat Steps 3 through 8 for each port that you want to restore.