Comtrol RocketPort 550 uPCI Windows 2000 - Manual (Page 6)

6
4 The default selection is Search,
ENSURE THAT SEARCH IS SELECTED
Check that Search is selected and Click Next
5 The next dialog window asks where to search for the Driver.
Select Specify a location
Enter C:\Comtrol\Installations\RP550W2K into the dialog window
If you extracted the driver files to an alternative folder then replace the above
path with the alternative path for the driver files.
Click Next
Windows will search the Win2000 folder for the Driver
6. The next dialog window displays the path C:\Comtrol\Installations\RP550W2K
If you extracted the driver files to an alternative folder then that path will be
displayed instead.
Check the dialog window displays the path to the folder containing the
RCKT550.INF file
Click Next to start the installation
7. Windows will briefly display the progress of the Driver installation.
When complete, Windows will display the Finished Installing dialog window
Click Finish
If installing a RocketPort/BroadPort 550 Universal card then the installation is
now complete and you should proceed to section 5.
If installing a RocketPort 550 card (i.e. the original RocketPort 550 PCi 5V card)
then Windows now detects that a second installation is required for the second of
the multifunction devices (see previous technical note ). You must continue with
step 8.
8. Windows displays the "Found New Hardware Wizard" dialog window for the
second of the multifunction device
Click Next
9. The next dialog window asks :
Search for the best driver for your device. (Windows Default)
or