Casio PRIVIA PX330ES1A - Manual (Page 25)

English
Using Auto Accompaniment
E-23
6.
Repeat steps 3 through 5 to edit all of the
accompaniment patterns and parts you want.
7.
After editing is complete, adjust the tempo of
the rhythm as desired.
• The tempo you set here becomes the initial default
tempo of the rhythm.
8.
Press the  (EXIT) button.
This causes a confirmation message to appear asking if
you want to save your edits.
9.
Press the  (YES) button.
This displays a screen for specifying the user rhythm
number and rhythm name.
•
If you want to exit the editing operation without
saving, press the
 (NO) button instead of the 
(YES) button.
10.
Decide on the user rhythm number where you
want to save the rhythm and a rhythm name.
• Use the  (u) and  (i) buttons to move the
cursor to the user rhythm number and rhythm name
character you want to change. Use the
 (w, q)
buttons to select the number or character you want.
• The rhythm name characters you can select are
shown below. To input a space, press both of the

(w and q) buttons at the same time.
11.
Press the  (ENTER) button.
This saves the data.
•
If the rhythm number where you are saving the data
already has data saved to it, a message (Replace?) will
appear on the display to confirm whether you want
to replace the existing data with the new data.
IMPORTANT!
• Saving user rhythm data to a user rhythm number
that already has data will cause the existing data to
be replaced by the new data.
NOTE
• If the size of the accompaniment pattern or
instrument part data is too large to be edited, a
memory full message (Memory Full) will appear on
the display. If that happens, select a different
accompaniment pattern or instrument part for
editing.
Destination user rhythm number
Rhythm name