List of messages – Canon DC40 User Manual
Page 126
126
List of Messages
Message
Explanation
SET THE TIME ZONE,
DATE AND TIME
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
CHANGE THE BATTERY
PACK
Battery pack is exhausted. Replace or charge the battery pack.
TEMPERATURE TOO
HIGH CANNOT RECORD
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the battery
and let the camcorder cool down before resuming use.
–
TEMPERATURE TOO
HIGH CANNOT REMOVE
DISC
CANNOT RECORD
CHECK THE DISC
There is a problem with the disc. Replace the disc.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
The disc’s recording surface may be dirty or scratched.
–
REACHED THE
MAXIMUM NUMBER OF
SCENES
The maximum number of scenes has been reached. Delete some
recordings (DVD-RW) to free some space or replace the disc.
CANNOT PLAY DISC
The disc is dirty or you attempted to play back a disc type not
supported (not DVD-R/RW).
–
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
CANNOT EDIT DISC
There are no scenes to edit or the recording is damaged.
–
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
CANNOT DIVIDE THE
SCENE
Photomovie scenes cannot be divided.
You may not be able to divide very short scenes.
–
Scenes cannot be divided when the disc contains 999 scenes.
–
You may not be able to further divide scenes shorter than 5
seconds that were created by dividing a previous scene.
–
DISC IS FINALIZED
CANNOT RECORD
You cannot record additional scenes on a finalized DVD-R disc.
–
You cannot record additional scenes or unfinalize a DVD-RW disc
in VIDEO mode that was finalized with another digital device.
UNFINALIZE THE DISC
You cannot record additional scenes or convert still images to a
Photomovie scene on a finalized DVD-RW recorded in VIDEO
mode. Unfinalize the disc first.
DISC IS PROTECTED
The disc is protected. Replace the disc or remove the disc
protection.
DISC ERROR
Initialize new DVD-RW discs before using them.
CANNOT READ THE
DISC
CHECK THE DISC
Disc could not be read. Try cleaning it or replace the disc.
This message can also appear if the camcorder has exceeded its
operational temperature. Disconnect the power adapter and
remove the battery and let the camcorder cool down before
resuming use.
–
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
The disc may not be loaded correctly. Try removing the disc and
reinserting it.
–