To open the trunk, Using the panic alarm – Dodge 2013 Challenger SRT8 User Manual

Page 28

Advertising
background image

feature. This feature can be turned on or turned off. Refer
to “Electronic Vehicle Information Center (EVIC)/
Personal Settings (Customer-Programmable Features)” in
“Understanding Your Instrument Panel” for further in-
formation.

• When not using the EVIC, perform the following steps:

1. Press the LOCK button on a programmed RKE trans-

mitter for at least 4 seconds, but no longer than 10
seconds. Then, press the PANIC button while still
holding the LOCK button.

2. Release both buttons at the same time.

3. Test the feature while outside of the vehicle by press-

ing the LOCK button on the RKE transmitter with the
ignition switch in the OFF position and the Key Fob
removed.

4. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

Pressing the LOCK button on the RKE transmit-

ter while you are in the vehicle will activate the Security
Alarm. Opening a door with the Security Alarm activated
will cause the alarm to sound. Press the UNLOCK button
to deactivate the Security Alarm.

To Open The Trunk

Press the TRUNK button on the RKE transmitter two
times within five seconds to open the trunk.

If equipped with Keyless Enter-N-Go™ (Passive Entry),
refer to “Keyless Enter-N-Go™” under “Things To Know
Before Starting Your Vehicle” for further information.

Using The Panic Alarm

To turn the Panic Alarm feature ON or OFF, press and
hold the PANIC button on the RKE transmitter for at
least one second and release. When the Panic Alarm is on,

26

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising