Daytime running lights — if equipped – Dodge 2012 Challenger User Manual

Page 142

Advertising
background image

To activate the delay feature, place the ignition in the OFF
position while the headlights are still on. Then, turn off
the headlights within 45 seconds. The delay interval
begins when the headlight switch is turned off.

If you turn the headlights or parking lights on, or place
the ignition in the RUN position again, the system will
cancel the delay.

If you turn the headlights off before the ignition, they will
turn off in the normal manner.

NOTE:

The lights must be turned off within 45 seconds

of placing the ignition in the OFF position to activate this
feature.

The Headlight delay time is programmable. Refer to
“Electronic

Vehicle

Information

Center

(EVIC)/

Customer-Programmable Features” in “Understanding
Your Instrument Panel” for further information.

Daytime Running Lights — If Equipped
The headlights will come on as Daytime Running Lights
whenever the ignition is placed in the RUN position, the
headlights are off and the parking brake is released. The
headlight switch must be used for normal nighttime
driving.

If vehicle is equipped with High Intensity Discharge
Headlights, the front turn signal lamps provide the
Daytime Running Lamp (DRL) function. If equipped, the
DRL will flash when a turn signal is in operation, and
return to DRL mode when the turn signal is no longer
flashing.

140

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising