Instructions – Dodge 2009 Ram User Manual

Page 412

Advertising
background image

3. Place the shift lever into PARK. On four-wheel drive
vehicles, shift the transfer case to the 4L position.

4. Turn the ignition OFF.

5. Turn on the Hazard Warning flasher.

6. Block both the front and rear of the
wheel diagonally opposite the jacking
position. For example, if the right front
wheel is being changed, block the left
rear wheel.

NOTE:

Passengers should not remain in the vehicle

when the vehicle is being jacked.

Instructions

WARNING!

Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
Always park on a firm, level surface as far from

the edge of the roadway as possible before raising
the vehicle.

Block the wheel diagonally opposite the wheel to

be raised.

Set the parking brake firmly and set an automatic

transmission in PARK; a manual transmission in
REVERSE.

Never start or run the engine with the vehicle on a

jack.

Do not let anyone sit in the vehicle when it is on a

jack.

(Continued)

410

WHAT TO DO IN EMERGENCIES

Advertising