To disable a rke transmitter linked to memory – Dodge 2009 Ram 1500 User Manual

Page 145

Advertising
background image

To recall the memory settings for driver one, press
MEMORY button number 1 on the driver’s seat or the
UNLOCK button on the RKE transmitter linked to
memory position 1.

To recall the memory setting for driver two, press
MEMORY button number 2 on the driver’s seat or the
UNLOCK button on the RKE transmitter linked to
memory position 2.

A recall can be cancelled by pressing any of the
MEMORY buttons on the driver’s seat during a recall (S,
1, or 2), or pressing any one of the power seat buttons,
pressing the adjustable pedals button, or pressing either
the LOCK or UNLOCK button on the RKE transmitter
when not in the ignition switch. When a recall is can-
celled, the driver’s seat and the pedals stop moving. A
delay of one second will occur before another recall can
be selected.

NOTE:

A chime sound may be heard if setting memory

was inhibited for any reason.

To Disable a RKE Transmitter Linked to Memory

1. Turn the ignition switch to the OFF position and
remove the key.

2. Press and release the memory SET button located on
the driver’s seat.

3. Within 10 seconds, press and release the UNLOCK
button on the RKE transmitter.

To disable another RKE transmitter linked to either
memory position, repeat Steps 1-3 for each RKE trans-
mitter.

NOTE:

The capability to link RKE transmitters to

memory is enabled when delivered from the factory. The
capability to link RKE transmitters to memory can be
disabled (or later re-enabled) by an authorized dealer. For

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

143

Advertising