Drawmer MX40 Pro Quad Channel Punch Gate - Manual (Page 13)

TECHNICAL SPECIFICATIONS
(All measurements reference +4dBu operating level)
INPUT IMPEDANCE 20KÙ (Balanced)
KEY INPUT IMPEDANCE 20KÙ (Unbalanced)
INPUT CMR >-40dB
MAXIMUM INPUT LEVEL +21dBu
MAXIMUM KEY INPUT LEVEL +21dBu
OUTPUT IMPEDANCE 50Ù (Balanced)
MAXIMUM OUTPUT LEVEL +21dBu
BANDWIDTH <10Hz to 22KHz -1dB
NOISE W ideband
(worst case)
22Hz - 22KHz
AV -100dB -105dB
RMS -104dB -106dB
DISTORTION 100Hz 1KHz 10KHz
Gate Open with +4dBu input < 0.04% < 0.02% < 0.04%
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 15 W atts
FUSE RATING 63mA for 230Volt, 125mA for 115Volt
CONFORMING TO IEC 127-2
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 44mm (h) x 175mm (d)
WEIGHT (incl packaging) 3.7 Kgs
13