Drawmer DF330 Universal Noise Filter - Manual (Page 13)

DF330 OPERATOR’S MANUAL 11
TECHNICAL SPECIFICATIONS
INPUT IMPEDANCE XLR 51K Ohm
Jack 10K Ohm
NOMINAL INPUT LEVEL +4dBu (XLR), -10dB u (JACK)
MAXIMUM INPUT LEVEL +21dBu (XLR), +7dB u (JACK)
OUTPUT IMPEDANCE XLR 50 Ohm
Jack 100 Ohm
NOMINAL OUTPUT LEVEL +4dBu (XLR), -10dB u (JACK)
MAXIMUM OUTPUT LEVEL +20dBu (XLR), +6dB u (JACK)
BANDWIDTH 10Hz to 22KHz -1dB
CROSSTALK @10kHz Better than -80dB
OUTPUT BALANCE Better than 40dB 20Hz to 10kHz
INPUT CMR Better than 40dB 20Hz to 10kHz
NOISE AT UNITY GAIN -93dB, ( 22Hz to 22KHz ) ref +4dBu
DISTORTION Better than 0.025% at 100Hz, 1KHz and 10KHz
ATTACK TIMES Expander: 50µS to 20mS ( Automatic )
Filter : 100µS
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz,13 Watts
FUSE RATING 125mA for 230Volt, 250mA for 115Volt
CONFORMING TO IEC 127-2
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
WEIGHT (incl packaging) 3.4 Kgs