Chicago Electric Chicago Power Electric Systems 1.5 AMP Electronic Onboard Battery Charger 99857 - Manual (Page 12)

SKU 99857 For technical questions, please call 1-800-444-3353. Page 12
troubleshooting
problem possible causes likely Solutions
Tool will not
operate. LED
lights off.
No power at outlet. 1.
Cord not connected. 2.
Check power at outlet. 1.
Check that cord is plugged in. 2.
LED lights on,
but tool does not
charge battery
Loose or dirty connection at 1.
battery terminals.
Check connections. Clean and re-tighten. 1.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
plEASE rEAd thE FolloWing cArEFully
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
pArtS liSt
part description Qty.
1 LED Light 3
2 Top Cover 1
3 Radiator 1
4 Printed Circuit Board 1
5 Bracket C 1
6 Bracket B 1
7 Bottom Cover 1
8 Power Cable 1
9 Bracket A 1
10 2.5 x 12 Self Tapping Screws 4
11 Transformer 1
12 Output Wires 1