Casio B350 - Manual (Page 17)

NAVIGATION MENU
16 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)
2 Getting Started
Please make sure that the battery in your device is charged (see page 7).
Switch on the unit and from the menu select Navigation. The navigational software will start
to load.
First you will see the warning statement screen.
Tap on “Accept” to confirm that you have read the
statement and to continue. If you do not wish to
be
shown this screen in the future check the box next to
“Don’t show this statement again”. You will now be
shown the Binatone screen, which shows the
progress of the loading software on the yellow bar
at
the bottom.
Once the software has loaded you will be shown the
Free Navigation Menu screen, this is the starting point
for all your navigating needs.
For more information on free navigation mode (see
page 20).
In order to enter destinations and access the
many settings of the navigational software, tap
Menu. This will then take you to the Free Navi
Menu screen.
You can choose from the 3 following options;
Go to – Opens the Search Menu screen. From
here you can select a point to navigate to.
Map Options – Allows you change the way the
map looks and behaves during navigation.
Settings – Allows access to the main settings
menu of the unit, which you can set to your
personal preference.
- Tap to return to the Free Navigation mode
- Tap to exit Navigation. You will be asked to confirm if you wish to exit, tap Yes
to exit, tap No to cancel and return to the Free Navi Menu.
- Returns you to either the Free Navigation screen or Route Navigation screen
if a route has been planned. This option is always available when not on any
Navigation screen.