ebm-papst K3G310-BB49-32 - Manual (Page 4)

Operating instructions K3G310-BB49-32
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All measures have the unit mm.
1 Inlet nozzle with bleeder connection for pressure relief (k-factor: 116)
2 Cable diameter: min. 4 mm, max. 10 mm, tightening torque: 2.5±0.4 Nm
3 Tightening torque 3.5±0.5 Nm
4 Mounting position: shaft horizontal (install the support struts only vertically as shown in the view!) or rotor on bottom; rotor on top on
request
Item no. 51427-5-9970 · ENG · Revision 82547 · Release 2014-05-08 · Page 4 / 12
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com