Operating instructions – ebm-papst K3G400-AQ23-31 User Manual
Page 4
Advertising
Operating instructions
K3G400-AQ23-31
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All measures have the unit mm.
1
Inlet nozzle with bleeder connection for pressure relief (k-factor: 188)
2
Cable diameter: min. 4 mm, max. 10 mm; tightening torque: 4±0.6 Nm
3
Tightening torque 3.5±0.5 Nm
4
Mounting position: shaft horizontal (install the support struts only vertically as shown in the view!) or rotor on bottom; rotor on top on
request
Item no. 50648-5-9970 · ENG · Revision 82539 · Release 2014-05-08 · Page 4 / 12
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com
Advertising