Emerson Radio CR500 - Manual (Page 6)

6
OPERATION (CONTINUED)
DEFROSTING
1
Refrigerator compartment: Defrosting process is
automatic; melted frost flow into drip tray and
automatically evaporate.
Freezer compartment: Defrosting for the freezer
must be performed manually.
1. Turn the thermostat knob to the OFF position
and leave the freezer door open.
2. Remove all food and ice cube tray or transfer to
refrigerator compartment.
3. Clean and wipe out the melted frost with a
cloth.
4. After defrosting, turn thermostat knob to origin
position.
Note: To avoid damaging the freezing
compartment wall, do not use any sharp objects to
remove the frost or to separate the frozen food.
REPLACING THE LIGHT BULB
1
1. Unplug refrigerator or disconnect refrigerator
from power supply before you remove the light
bulb.
2. Unscrew the middle and lower parts of the
thermostat holder assembly, marked by the
arrows in the diagram).
3. Pull the light bulb cover (Thermostat holder
assembly) outward to remove it.
4. Unscrew the light bulb.
5. Replace with a 15-watt 120V appliance bulb
only. (Not all bulbs will fit your refrigerator. Be
sure to replace the bulb with the same
Candelabra screw Type E-12 and shape. The
bulb T6 can be used.)
6. Plug in refrigerator or reconnect refrigerator to
power supply.