Emerson Radio DTE516 - Manual (Page 16)

OPERATION (CONTINUED)
15
Turn on the unit and insert a CD,
then press the PROG button; the
PROG indicator and “00” will blink,
then “01” (program number) will
appear in the display.
MIN SEC
/ PAUSE
1
Select the first track to be played
back using the SKIP/SEARCH o 1
or n 2 button, then press the PROG
button ❸ again. Repeat this step to
program additional tracks, up to 20
tracks.
MIN SEC
/ PAUSE
2 1
3
2
To skip forward or backward
through the programs, press the
SKIP/SEARCH o 1 or n 2 button.
When all the programmed tracks
has been played, it will stop.
MIN SEC
/ PAUSE
2 1
4
TO PROGRAM THE MEMORY
Press the PLAY/PAUSE (®p)
button (on the top of the unit) to
begin Programmed playback and
adjust the VOLUME control 1 and
BBS switch 2 as desired; the PROG
indicator stops blinking.
1
2
3
NOTES:
• Press the STOP/OFF (■) button to stop the disc before it is finished.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Press the P-MODE button before pressing the PLAY/PAUSE (®p) button
to activate Repeat One, All, Intro or Random playback.
• Open the door, or turn the power off by pressing the STOP/OFF (■) button
twice, to clear the program.